top of page

Drop-In Products

DropIn-AirLock-1800x1286.png

Coyote's New C10A Air-Lock Drop-In

is Now Available.

- Lighter - Stronger - Better Seal - Tighter Fit

Great for 3D Printed Sockets & Traditional with New Dummy

SuctionPuck-1-10-2024--(6)cutout-shadow.png
Suction-Puck---CleanShadow.png

The New Suction Puck Drop-In

Designed for 3D Sockets

and the Suction Puck Drop-In Dummy is designed for traditional sockets.

Now Available
DropIn Lock Special 960x300 - Market Place Ads 6-17-2024 GFX.png
MicrosoftTeams-image (2).png

Available in the Air-Lock, Easy-Off Lock,

and now the Suction Puck Drop-In

Air-Lock Drop-In

DropIn-AirLock-1800x1286.png

Use the Air-Lock Drop-In for when you want a removable lock housing.

  • Great for 3D printed sockets

  • Water-Resistant

  • Airtight suction - dual suspension security of a pin

  • Expulsion valve or suspension sleeve not needed in most cases

For 3D printing contact Coyote® for your STL and OBJ Files.

New Product - Now Available
C10A | Air-Lock Drop-In

Weight Limit: 350 lbs

Build Height: 2.010"

Diameter: 2.46"

 

New lighter, stronger, tighter fit, better seal design.

Great for 3D printed sockets and traditional fabrication with the new fabrication dummy.

Patent No. 6334876. 
Other patents pending. 

C10AD - Fabrication dummy sold separately

C10AD | Air-Lock Drop-In Fabrication Dummy

The C10AD Air-Lock Drop-In Fabrication Dummy was designed for traditional fabrication methods (Thermoform and Lamination) so the lock can be removed. 

The CD10A and CD10AD are slightly wider than the CD122A and CD122AFD so these products are NOT interchangable.

image.png
Drop-In Lock Special
Buy 3 - Get the Dummy for FREE
DropIn Lock Special 960x300 - Market Place Ads 6-17-2024 GFX.png
Contact your distributor for Part # C10ADK
Buy 3 - C10A Air-Lock Drop-In locks & Get a Free - CD10AD Air-Lock Drop-In Fabrication Dummy
This promotional special is for a limited time and may expire at any time.
CD103LP-and-3-Springs-1-300x155.jpg

If lock plate replacement is happening frequently, make sure you are adjusting pin spacers to minimize pistoning. If the prosthetic is used in a gritty, sandy environment you might have the patient clean out the bottom of the socket more frequently.

*CD103LP: the part # for the replacement lock

To obtain our .stl files or .obj files for our drop-in 3D printed products, please download this form, sign it, and send it to coyote@coyote.us

Easy-Off Drop-In Lock

DropIn-EasyOff-wShaddow.jpg
CD122E | Easy-Off Drop-In Lock

Weight Limit: 265 lbs

Build Height: 2.175"

Diameter: 2.42"

Use the Drop-In Easy-Off Lock for when you want a removable lock housing

CD122EFD - Fabrication dummy sold separately

  • Airtight suction - dual suspension security of a pin

  • Easy donning and doffing with lever release

  • Water-resistant

CD122EFD | Easy-Off Drop-In Lock Fabrication Dummy
Untitled design (70).png

Dummy for Drop-In Easy-Off Lock

Drop-In Dummy
Push Plate

Threaded
Stud

Extractor
Bolt

Suction Puck Drop-In

Now Available

Tailored for seamless integration with 3D printed sockets

SuctionPuck-1-10-2024--(6)cutout-shadow.png
  • Designed for 3D Printed Sockets

  • Enhanced comfort for users

  • Efficient built-in one-way air expulsion valve

  • Built in four hole connector

CD120SP | Suction Puck Drop-In

Weight Limit: 265 lbs

Build Height: 1.5"

Diameter: 2.42"

Use the Drop-In Suction Puck for when you want to print a 3D socket.

For 3D printing contact Coyote® for your STL and OBJ Files.

CD120SPD - Fabrication dummy sold separately

Suction-Puck---CleanShadow.png
CD120SPD Parts Included.JPG
CD120SPD | Drop-In Suction Puck Dummy
CoyoteSuctionPuck-Socket-1000x750.png

PINS ARE SOLD SEPARATELY & COME 2 PER PACKAGE

Air-LockEasyOff-Pins-white-1500x629-768x322.png

The two-part pin has been our standard for years. The solid brass pin can be quieter and has a higher pull strength. The thread is determined by which liner you choose.

Which Pin to Choose?

Billing Information: Recommended Codes

L5671: Addition to lower extremity, Below Knee/Above Knee suspension locking mechanism (shuttle, lanyard, or equal), excludes socket insert

*L5647: Addition to lower extremity, Below Knee, suction socket

*L5652: Addition to lower extremity, suction suspension, Above Knee or Knee Disarticulation Socket

*Not recommended for billing Medicare. Coyote believes that "suction" in a prosthetic refers to the negative pressure created inside the socket, rather than componentry such as an expulsion valve or sleeve. Because we think suction as a function, we believe it should be permitted to bill L5671 in conjunction with the L5647 or L5652 in cases when it is medically necessary. As with other situations where multiple suspension methods are used and billed we feel the combination of a lock and suction helps to increase safety for the patient.

**The CD117 Easy-Off Lock can be used with a vacuum system and will maintain vacuum levels. Both lock code and vacuum code can be billed when using dual suspension. Not recommended for billing with Medicare.

The listing of codes with our products should not be construed as a guarantee for coverage and/or payment.

The ultimate responsibility for the coding of services/products rests with the individual practioner.

For more information regarding billing the Air-Lock and our socket pressure study between airtight and traditional pins, please fill out the contact form below or head to our Contact page for more options.

bottom of page