Lowpro Summit™ Lock

CD102  |  LowPro Summit™ Lock 

Easier to don than original. Must be fabricated into socket

Patent No. 6666894

The LowPro comes with a lamination tool to integrate it into the socket. This lock was designed specifically for long limbs, to control rotation and requires zero clearance! There’s no need to purchase a locking liner and you can use any socket adapter.

Can be used for any activity level, above or below the knee, for anyone up to 265 lbs.

  •  Liner attachment shape makes the liner simple to roll on
  •  Easy to cover cosmetically
  •  The ergonomic tab feeds easily into the lock
  •  Controls rotation
  •  Comes with a lamination tool

CD102LT  |  Lamination Tool

Provided with the CD102 LowPro Lock kit

CD101LA  |  Injected Liner Attachment

Attach to liner with Coyote Quik Glue or 5 minute epoxy

Coyote LowPro Summit Lock Diagram
Coyote Integrator


CD101LA | Injected Liner Attachment

Attach to liner with Coyote Quik Glue or 5 minute epoxy

Billing Information – Recommended Codes

L5679*   Addition to lower extremity, Below Knee/Above Knee, custom fabricated from existing mold or prefabricated, socket insert, silicone gel, elastomeric or equal, for use with locking mechanism.

L5671   Addition to lower extremity, Below Knee/Above Knee suspension locking mechanism (shuttle, lanyard or equal), excludes socket insert.

*Adding the Proximal Lock to a cushion liner changes the liner from a cushion liner to a locking liner. So we recommend billing L5679 instead of L5673.

The listing of codes with our products should not be construed as a guarantee for coverage or payment.

Ultimate responsibility for the coding of services/products rests with the individual practitioner.

Coyote Design’s prosthetic locks are made to stand up to the elements so you can participate in whatever life brings.

Fabricate socket with LowPro Lock using fabrication dummy.

Attaching Bow-tie attachment for Summit Lock and LowPro Lock to a liner.

Installation video of Coyote Design’s Wave Suction Band (CD130B – S, M, L, X) Small, Medium, Large and Extra Large.

Fabricate socket with flexable Inner using LowPro Lock using fabrication dummy

Fabricate test socket using the CD101 Summit Lock.